*Do not tighten bolts down completely during this portion of assembly.
E
A
C
AA
STEP 4:
Insert two Bolts M6x15mm (AA) through one end of the Small Arch (E) and
into the screw-threading near the top of Pole (A). Insert two bolts M6x15mm
(AA) through one end of the Small Arch (E) and into the screw-threading
near the top of Pole (C). Connect Pole (B) and Pole (C) together by inserting
Small Arch (E) together by using two Bolts M6x15mm (AA) on either side.
When complete, both Pole (C) should be diagonal from one another.
8
support@tdcusainc.com
MODEL: 32720-20 PRODUCT CODE: 43472 05/2020
Assembly Instructions
D
E
D
C
B
AA
(8) Bolt
(M6x15 mm)
AFTER SALES SUPPORT
1800 599 8898
USA
*It is advised to use the upper most screw-threading on Poles (A, B,
& C) for Shelves (F) so that they are level, use a level if necessary. The
lower two inserts will be used later in these instructions for the basket.
Do not tighten bolts down completely during this portion of assembly.
AA
(11) Bolt
(M6x15 mm)
DD
(8) Knob Screw
STEP 5:
Insert two Bolts M6x15mm (AA) through the Shelf Brace (O) and into the
bottom of Shelf (F) at one end; see Fig. 1. Repeat this step to connect a
second Shelf Brace (O) to the opposite end of Shelf (F). Repeat these steps
to assemble the second Shelf (F) with the two remaining Shelf Braces (O).
STEP 6:
Insert three Bolts M6x15mm (AA) through Utensil Rack (P) and into the
bottom of one Shelf (F). See Fig. 2 for the correct orientation on how
this part should be installed.
STEP 7:
Insert two Knob Screws (DD) through both Shelf Braces (O) on Shelf (F)
with Utensil Rack (P) and into the upper two screw-threading inserts
found on Poles (A & C); see Fig. 3. Repeat this step to connect the second
assembled Shelf (F) to Poles (B & C).
AFTER SALES SUPPORT
1800 599 8898
MODEL: 32720-20 PRODUCT CODE: 43472 05/2020
Fig. 1
O
AA
F
Fig. 3
Fig. 2
P
AA
USA
Assembly Instructions
F
DD
9
support@tdcusainc.com