Gardenline 32720-20 Manual Del Usuario página 6

*Do not tighten bolts down completely during this portion of assembly.
Fig. 1
L
G
M
EE
(6) M6 Nut
BB
(4) Bolt
(M6x15 mm)
STEP 8:
Insert the longer ribs of the four Canopy Two Tier Ribs (G) into the longer
ends of the Main Canopy Connector (M) until they are locked in place. Insert
the short ribs of the four Canopy Two Tier Ribs (G) into the Top Canopy
Connector (L) until they are locked in place. Insert the two Canopy Ribs
(H) into the shorter ends of the Main Canopy Connector (M) until they are
locked in place. See Fig. 1 for an illustration of how these parts connect.
STEP 9:
Place assembled ribs with connectors over the height of assembled frame.
Place ends of the Canopy Two Tier Ribs (G) in between Rib Braces (N) at
the top of each Pole (A, B, & C). Place ends of Canopy Ribs (H) in between
Rib Braces (N) found at the center of both Long Arches (D). Insert six Bolts
M6x32mm (BB) through all Rib Braces (N) and through both rib types; see
Fig. 2. Use M6 Nut (EE) with M6x32mm (BB) to hold these parts together.
10
support@tdcusainc.com
MODEL: 32720-20 PRODUCT CODE: 43472 05/2020
Assembly Instructions
G
G
H
EE
Fig. 2
BB
AFTER SALES SUPPORT
USA
*Do not tighten bolts down completely during this portion of assembly.
Step 10
Step 11
CC
STEP 10:
Insert three Washer & Bolts M6x18 (CC) through Basket Panel (I) and
into screw-threading found on the side of Basket Shelf (J). Repeat this
step to assemble the second Basket Panel (I) to Basket Shelf (J).
STEP 11:
Place Basket Ends (K) in between Basket Panels (I) on both ends of the
Basket Shelf (J). See Fig. 1 for the correct orientation of this part. Insert
two Bolts M6x18 (DD) through Basket Panels (I) and into Basket Ends (K)
on either side of both ends to complete the basket.
*Complete assembly by securely tightening all bolts left loose
through the entire construction process.
AFTER SALES SUPPORT
1800 599 8898 1800 599 8898
MODEL: 32720-20 PRODUCT CODE: 43472 05/2020
I
J
K
Fig. 1
USA
Assembly Instructions
I
CC
K
I
CC
(12) Washer & Bolt
(M6x18 mm)
11
support@tdcusainc.com