Casals CPLI14K2 Instrucciones Originales página 7

cord. - Always check the workpiece before
e risk operation and remove any obstructions such
as nails, staples, screws, string, rags, cloths
and other debris.
ct to
fer if - Only use the appliance for carrying out dry
tasks.
ving - Do not use the appliance on any part of the
body of a person or animal.
- Let the appliance running with no load for
able 30 seconds in a safe position. If you notice
serious vibration or other defects stop the
away appliance immediately. Then check the
se. problem and /or proceed as we describe on
Anomalies and Repair clause.
ories - The appliance can be used on surfaces such
as: wood, cardboard, plastic, plaster, etc.
ories
ctive. Product description and Specifications
mains Description
any
1 Keyless chuck
only, 2 Torque adjustment ring.
3 Cooling vents
use. 4 Soft grip
y the 5 Power light
o its 6 Forward/reverse switch
7 On / Off / speed adjustment switch
ould 8 Battery release button
play 9 Battery
10 Function ring
here 11 Charger
C 12 Gear Selector
eme 13 Belt Holder
es or If the model of your appliance does not have
the accessories described above, they can
-free also be bought separately from the Technical
Assistance Service.
Charging the battery
Caution: A new battery is not fully charged
and must therefore be charged before the
appliance is used for the first time.
Caution: During the handling of batteries,
do not touch both poles at the same time,
as this will provoke the partial discharge
of the stocked energy therefore affecting
longevity.
- Charge the battery at an atmospheric
temperature of between 4 and 40ºC.
- When the battery is empty, the appliance
is switched off by means of a protective
circuit. The inserted tool no longer rotates.
- Plug the charger (11) into the mains. And
the green pilot light will turn on
- Remove the battery (9) from the appliance
by pressing the battery unlocking button (8)
and pulling the battery out of the appliance
- Insert the battery (9) into the charger (11).
(Fig B)
- The green pilot light will turn off and the
red pilot will turn on to indicate that the
battery is under charging process.
- Once the charge is completed the red
pilot light will turn off and green pilot light
will turn on.
- When the battery is charged disconnect
the charger from the mains supply.
- Remove the battery (9) pressing the
battery unlocking button (8) and pulling the
battery out of the appliance.
Instructions for use
Before use:
- Make sure that all the product's packaging
has been removed.
- Ensure that the voltage indicated on the
rating label matches the mains voltage
before plugging in the appliance.
7