Kohler K-475 Guia De Instalacion página 13

Install the Glass Shelf (cont.)
Insert four nylon-tipped setscrews (provided) into the bracket
assembly. Tighten the setscrews with a hex wrench. Do not
overtighten.
Install a cylinder head onto each stem of the bracket assembly, as
shown.
Thread a setscrew into each cylinder head. Tighten the setscrew
with a hex wrench.
Measure the distance between the centers of the cylinder head
shafts.
Install the wall brackets and bonnets using the measured
dimension. The side of the bracket with the setscrew holes should
face down.
Ensure the wall plates are properly aligned and securely
anchored.
Wet the ends of the shelf with mild soap solution.
Carefully slide the shelf into the bracket assemblies. Adjust each
bracket assembly as necessary.
Tighten the nylon-tipped setscrews to secure the bracket
assemblies to the wall plates.
Kohler Co. 13 1020823-2-D