Publicidad
Idiomas disponibles
Idiomas disponibles
The BL-KR battery powered irrigation module communicates with the K-Rain BL-KR
Application on a smartphone or tablet by using Bluetooth SMART 4.0 technology
(Low Energy) on an iPhone 4s and later, and Samsung Galaxy S3 and later.
For a full list of compatible devices, go to www.krain.com/blkrdevicelist.
IMPORTANT:
For use only with 9V DC Latching Solenoids. As some solenoids will come from
the manufacturer with the plunger already magnetically latched open, some zones
will default to OPEN. Follow the start-up procedure for systems
with DC Latching Solenoids. (Page 12)
Each station can only be associated with 1 program – Either A, B or C.
You cannot associate a station with multiple programs.
For every change to the program in the Mobile App, you must tap the SAVE icon
in the upper right hand corner and then TRANSMIT from the home screen.
1. Install the App:
From the App Store
2. Install a 9 Volt Battery in the Controller:
Unscrew the cap, remove the seal and fasten the battery to the correct terminals.
Replace the seal and cap and hand-tighten the cap to ensure it seals.
3. Associate the BL-KR with you smartphone:
a. Ensure Bluetooth
enabled by going into Settings
on your smartphone.
b. Launch the K-Rain BL App.
c. A BL-KR with a battery installed
will communicate with your phone
and appear in the "Select a
BL-KR Module." You can now
associate a controller from
the launch screen.
01
or Google Play
is
Controller
Serial Number
Install the free K-RainBL App:
Signal
Strength
Publicidad
