Lenco DVD-517H Manual De Instrucciones página 22

SYSTEM SETUP
1 SYSTEM SETUP
1.1 SYSTEM SETUP
The system setup options are illustrated
below:
1.1.1 SOURCE
There are 3 kinds of sources illustrated
below.
SYSTEM SETUP
SOURCE
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
1.1.2 TV SYSTEM
According to the Color System of the TV, you
can choose the TV System.
Note:
NTSC is primarily used in the United States
SYSTEM SETUP
SOURCE
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
1.1.3 VIDEO
According to the output jack of TV set, you can
choose P-SCAN YPbPr,INTERLACE-YUV, TV-
RGB and S-VIDEO.
SYSTEM SETUP
SOURCE
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
DISC
USB
CARD
PAL
NTSC
AUTO
INTERLACE-YUV
P-SCAN YPbPr
TV-RGB
S-VIDEO
22
1.1.4 TV TYPE
According to the TV type,you can choose
16:9,4:3LB or 4:3PS.
SYSTEM SETUP
SOURCE
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
1.1.5 PASSWORD
The password option is initialized locked, and
you can not set the ratings limit or change the
password. In order for the Ratings feature to
work, the password mode must be turned on.
If you want to set the ratings limit ,
Select P ASSWORD in the system menu
with the up/down arrow buttons on the
remote, then use the right arrow button (on
the remote) to bring the cursor to the right,
enter 6666 and confirm with
Use the right arrow button (on the remote)
again to bring the cursor to the right, enter
6666 again (or a new password, wich you
have to remember) and press the left arrow
button on the remote. Now use the up/down
arrow buttons (on the remote) to select the
rating menu (1.1.6.)
SYSTEM SETUP
SOURCE
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
1.1.6 RATING
The Rating feature is a rating limit system,
like movie ratings. It works with DVD discs
that have been assigned a rating. This helps
you control the types for DVDs that your
family watches.
4:3PS
4:3LB
16:9
ENTER .
----