Pro-Lift T-5510 Manual De Piezas E Instrucciones De Funcionamiento página 4

ASSEMBLY (con't)
3. Press in the positioning pin and remove the slidable positioning tube from the wheel bracket (see figure 3).
Figure 3 - Removing wheel brack positioning tube.
4. Depress the positioning pin and slide the Wheel Track onto the protruding wheel bracket tubes. Once the Wheel
Track is positioned onto the Wheel Bracket, tighten the Socket Head Screws (see figure 4).
Notice: If screws are tightened before step 4, it may be difficult to slide the Wheel Tracks onto the Wheel Brackets.
Notice: Position the Wheel Track so that the overhang is toward the middle of the lift, and the longer portion is
towards the front of the lift.
Figure 4 - Attaching Wheel Track to Wheel Bracket.
5. Repeat steps 2 through 4 for the other side.
4