Before Use - Pro-Lift T-5355A Manual De Piezas E Instrucciones De Funcionamiento

BEFORE USE

Inspect lift before each use:
1. Before using this product, read the owner's manual
completely and familiarize yourself thoroughly with
the product and the hazards associated with its im-
proper use.
2. Ensure that rollers and lift arms move freely. Check
for and tighten any loose assemblies. Do not use if
cracked, broken, bent or otherwise damaged parts are
noted or if the lift is suspected to have been subjected
to a shock load. A shock load is caused by rapidly
opening and closing the release valve while the lift
is loaded. Such operation may result in a hydraulic
overload which may damage the hydraulic unit.
3. Verify that the product and the application are compat-
ible. Incompatibility is evident when the loaded mower
wobbles, feels unstable, and/or does not set securely
in the lift's wheel baskets. Tying down incompatible
loads will not make the loads secure and may cause
unexpected loss of load resulting in personal injury
and/or property damage.
4. Owner and operators of this device shall be aware
that no serviceable or replaceable parts are available
for this device other than those parts listed on page
5. Any lift that appears to be damaged in any way, is
worn or operated abnormally shall be removed from
service immediately until such time as repairs can
be made. Do not attempt to weld, rivet or otherwise
repair this device.
5. DO NOT modify or alter this device. It is recommended
that an annual inspection be done to this device by
qualified persons and that missing or damaged la-
bels, warning/safety decals be replaced with factory
authorized labeling.
ASSEMBLY
1. Attach the Lift Bracket to the lift arms with the pins
provided. Secure pins with the washers and clips provided.
Figure 2: Lift Bracket Assembly.
! WARNING
• Study, understand and follow all instructions
before operating this device.
• Use of this product is limited to lifting, holding and
lowering loads consisting of a single mower
compatible with the lift platform. Incompatibility is
evident when the loaded mower wobbles, appears
unstable, and/or does not securely engage the
wheel baskets.
• Restraining an incompatible load will not make the
load secure and may cause unexpected loss of
load.
• Do not exceed rated capacity.
• Use only on hard, level surface capable of
supporting the load.
• Center load on lift platform.
• Immediately after lifting load, ensure lift mechanical
load holding device is engaged.
• Never work on, under or around a load that is not
stable or secure.
• Keep operator's and bystander's head, hands and
feet away from lift arms when raising and lowering.
• No alterations shall be made to this product.
• Only attachments, restraints or adapters supplied
by the manufacturer shall be used.
• Failure to heed these messages may result in
personal injury and/or property damage.
2. Attach Bottle Jack to receiver platform using (2)
socket head screws and nuts.
Figure 3: Bottle Jack assembly to platform.
3