5
Position a Planter Lid on each Planter
Tank with the shaped handles over the
Air-line inlet grooves, though do not press
down to fit at this stage.
7
Position one Mesh Pot in the hole of each
Planter Lid.
For further information and video instructions, visit
6
8
www.plantit-growit.com
Position the Air-Pumps. They should be
higher than the water level (when the
Tanks are full - so ideally, on something
that is at least as tall as the Tanks), to
prevent back-siphoning when the pumps
are switched off. Connect two Air-lines
to each Air-Pump.
Fit the rubber feet and connector piece
to the Water Pump.