Ruwido Easytip Z1 Manual De Funcionamiento página 12

U s e r M a n u a l
Controlling the Colour & Brightness
If the controlling of brightness and colour is not possible in
the menu and if your original remote has special function
keys for these functions, follow the instructions below.
Press the (M) key quickly. The LED must flash once.
Step 1
If the LED illuminates continuously, the menu
control is activated. To control the menu, refer to
"Menu control" above.
If, after pressing the (M) key, the LED does not
flash at all the stored code does work with neither
the TV nor the analog functions.
To change the brightness press the (Programme +)
Step 2
key, to change the colour press the (Programme -)
key. When pressing these keys, the LED must
illuminate continuously confirming that the
controlling is possible.
Now you can adjust the chosen analog function
Step 3
(brightness or colour) by pressing the (Volume +)
and (Volume -) keys.
To quit the analog function mode just wait 10
Step 4
seconds or press the (F) key.
Controlling (Programme +) and (Programme -)
With some, especially older, TV models it may be not
possible to switch channels by pressing the (Programme +)
and (Programme -) keys. Check the manufacturers
operating manual or the original remote of your TV if it
supports this function.
12
Helpline 00800 31133113