Technical Specifications - IKOS 4HEAT Instrucciones De Instalación

TECHNICAL SPECIFICATIONS

EN
Communication port
Power supply
Material of the parts
Working temperature
Fixing
The following image shows the LEDs and buttons that make up the module.
A Ignition
B Communication with stove
C Wi-Fi communication
D Reset
E Configuration
A + C Ignition and Wi-Fi
RS232
5 V
Made of ABS
Between -20 °C and 60 °C
Wall plug + 3,5 mm self-tapping screws
Flashing Error
Set OK
Flashing No communication with the stove
Set Communication set
Flashing Wi-Fi not configured
Set Wi-Fi configured
– Press to reset the module
– Press to configure the module
Flashing Module working on setting phase
EN // 28
INSTALLATION INSTRUCTIONS