Homak RD00924380 Guía De Utilización Y Directivas De Funcionamiento página 4

OPERATION:
1. Inspect the entire cabinet for any issues prior to use.
2. Prior to first use, install a protective window cover onto the inside of the cabinet. This
protects the safety glass from continual use.
3. Attach Shop Vac to the Cabinet.
4. Attach Power Cord to switchbox on upper left side of Cabinet. Plug power cord into wall
outlet and turn to "ON" position to turn on light.
5. Place desired abrasive media in funnel.
6. Place item to be cleaned onto the metal net.
7. Close and latch the side door.
8. Wear protective gear prior to operation. Never wear loose fitting clothes, injury may
occur.
9. Turn on air compressor.
10. Blast the item as needed.
11. Used media will continually recycle itself inside the cabinet.
12. Be sure to turn off air compressor and light after each use.
13. Maximum operating pressure is 120 PSI. Operating at higher pressure could result in
serious injury.
14. To change abrasive, release hatch at the bottom of cabinet and drain into a suitable
container. Close hatch and pour new abrasive into cabinet.
15. The hole on the left side of the cabinet is for installation of a shop vac. We strongly
recommend the use of a shop vac or the cabinet will leak dust.
16. The 4" hole with louver vent in the upper right rear of the cabinet provides for proper
venting of the product during use. NEVER PLUG.
17. The maximum media capacity is 33 liters. Do not overfill.
MAINTENANCE:
Powder Coat Finish
For heavy build-up of dirt and grime, our powder coat paint finish can be cleaned with spray
wax. Lightly spray the wax on the surface, and gently wipe with a soft, dry microfiber cloth.
Window cleaner and a soft cloth dampened with water can be used to clean the finish on a
regular basis.
Customer Satisfaction
All mechanical parts are inspected and adjusted for proper use before shipment; however,
there may be some shifting of parts during transit. Should any item not operate correctly,
please call customer service at 1-800-874-6625.
- 4 -