Getting To Know Your Camcorder; Contents Of The Packaging; Charging The Batteries - LEXIBOOK DJA400 Serie Manual De Instrucciones

Key guide
Please refer to image A:
1. Power button
2. Speaker
3. Shutter button
4. Reset hole
5. AV out jack
6. MENU button
7. MODE button
8. LCD screen
Please refer to image B:
9. Power CHARGE indicator
10. BUSY indicator
11. Mini USB jack
12. Micro SD card slot
13. Protection cover
Unpacking the device
When unpacking, ensure that the following elements are included:
1 x DJA400 digital camcorder / 1 x USB cable /
1 x waterproof case / 2 x helmet mount / 1 x bike mount /
2 x stickers / 1 x CD-ROM / 1 x hand strap / 1 x instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire
ties and tags are not part of this product and should be discarded.
Note: Before using the camcorder for the fi rst time, please remove the
protective fi lm of the camcorder's LCD screen.
To recharge the internal lithium battery (350mAh), proceed as follows:
1. Make sure the camcorder is off.
2. Open the rubber cover that protects the mini USB jack.
3. Connect the USB cable to the camcorder (5 pin) and your computer
(4 pin). The power indicator (9) lights up red when the batteries are
charging and turns off when it is fully charged. It is normal for the
camcorder to be warm during charging.
Note: When the low battery icon
recharge the batteries.
A400series IM1125_20Mar_V05.indb 17

GETTING TO KNOW YOUR CAMCORDER

14. Lens
15. Up button
16. Down button
17. Helmet/bike mount tripod slot
18. Microphone
Please refer to image C:
19. Door clip
20. Waterproof buttons
21. Waterproof case
22. Bike mount
23. Screw (tightens clamp)
24. Screws (adjust camcorder position)
25. Helmet mounts
26. Strap

CONTENTS OF THE PACKAGING

CHARGING THE BATTERIES

appears on the LCD screen,
17
3/20/15 12:55 P