Kolcraft Jeep Wrangler All-Weather Umbrella Manual Del Usuario página 4

1
Arrow
Hub Cap
Axle
3
7
To Assemble Front Wheels
To Assemble Rear Wheels
RIGHT REAR WHEEL ASSEMBLY
Wheel
Washer
If stroller arrives to you with the wheels
off, follow the instructions below.
With the arrow on the front wheel facing
1
toward the stroller post, place wheel on
stroller until it locks onto stroller. Repeat
for other front wheel.
NOTE: To remove, squeeze tabs on
bottom of post and pull wheel off.
Wheel
Washer
For the right rear wheel assembly, slide
1
the wheel onto the axle.
Slide first washer onto axle.
2
Insert axle with washer and wheel into
3
right rear wheel assembly as shown.
Make sure axle is inserted into rear
wheel assembly from the inside wheel.
Slide second washer onto axle.
4
Slide other wheel onto axle.
5
Slide third washer onto axle.
6
Fit straight part of cotter pin through
7
hole on axle.
Line up tabs in each of the hub caps with
8
slots in the wheel, snap hub caps into place.
Repeat for left side.
9
4
Hub Cap
Washer
Cotter Pin