Summer Infant Sure and Secure Custom Fit Gate Manual De Instrucciones página 2

27681 Custom Fit IB Eng p2.pdf
F EAT UR ES & COMPONENTS:
Suitable for openings from 160cm, when used in an offset position, up to a maximum of 360cm.
Minimum opening when used in a straight line is 248cm.
Wood Screws (12) Wall Anchors (12)
SET UP :
Step 1: Unfold gate and attach the 2 Feet
(Figures A and B).
Step 2: Screw an Adjustable Hinge into each of the four corners of the
gate (Figures C1 and C2).
Step 3: Open the outer fabric flap (with Lock Logo
on it) to access the expansion handles (Figure D).
Step 4: Rotate handle clockwise until loose. This will
allow for gate panel to expand freely (Figure E).
Step 5: Expand the ends of the gate by pulling outward
to the approximate size for desired location.
NOTE: Make sure the expansion handles are loose. Some effort may be required as tubes may stick due to packing.
1 18/03/2016 11:16
Feet (2)
Wall Brackets
Adjustable Hinges
C2
C1