GE JK5000 Manual De Usuario página 15

Troubleshooting tips ... Before you call for service
Problem Possible Cause
Oven light does not Light bulb is loose or defective.
work
Pad operating light is broken.
Oven will not self- The temperature is too high to set a
clean self-clean operation.
Oven controls improperly set.
Excessive smoking Excessive soil or grease.
during clean cycle
Excessive smoking Food too close to burner element.
during broiling
Oven door will not Oven too hot.
open after a clean
cycle
Oven not clean after Oven controls improperly set.
a clean cycle
Oven was heavily soiled.
"LOCK DOOR" The self-clean cycle has been selected
flashes in the but the door is not closed.
display
LOCKED light is on The oven door is locked because
when you want to the temperature inside the oven
cook has not dropped below the locking
temperature.
"F— and a number You have a function error code.
or letter" flash in
the display
If the function code repeats.
Display goes blank A fuse in your home may be blown or the
circuit breaker tripped.
The clock is turned off.
Oven is in Sabbath Mode.
Power outage, Power outage or surge
clock flashes
"Burning" or "oily" This is normal in a new oven and will
odor emitting from disappear in time.
the vent
Strong odor An odor from the insulation around
the inside of the oven is normal for the
first few times the oven is used.
Fan noise A cooling fan may automatically turn
on.
My oven door glass No. The inner oven glass is coated with
appears to be a heat barrier to reflect the heat back
"tinted" or have a into the oven to prevent heat loss and
"rainbow" color. Is keep the outer door cool while baking.
this defective?
49-80722
What To Do
Tighten or replace bulb.
Call for service.
Allow the oven to cool and reset the controls.
See the Cleaning the Oven section.
Press the Cancel/Off pad. Open the windows to rid the
room of smoke. Wait until the LOCKED light goes off.
Wipe up the excess soil and reset the clean cycle.
Lower the rack position of the food.
Allow the oven to cool below locking temperature.
See the Cleaning the Oven section.
Clean up heavy spillovers before starting the clean cycle.
Heavily soiled ovens may need to self-clean again or for
a longer period of time.
Close the oven door.
Press the Cancel/Off pad. Allow the oven to cool.
Press the Cancel/Off pad. Allow the oven to cool for one
hour. Put the oven back into operation.
Disconnect all power to the oven for at least 30 seconds
and then reconnect power. If the function error code
repeats, call for service.
Replace the fuse or reset the circuit breaker.
See the Special features section.
Verify that the oven is not in Sabbath Mode.
See the Special Features section.
Reset the clock. If the oven was in use, you must reset
it by pressing the Cancel/Off pad, setting the clock and
resetting any cooking function.
To speed the process, set a self-clean cycle for a
minimum of 3 hours. See the Cleaning the Oven section.
This is temporary and will go away after several uses or
a self-clean cycle.
This is normal. The cooling fan will turn on to cool
internal parts. It may run for up to 1-1/2 hours after the
oven is turned off.
This is normal. Under certain light or angles, you may
see this tint or rainbow color.
15