Listo AM L3 Manual De Utilización página 28

3. Empty the waste from the dust container into the dustbin and, if necessary, clean the
inside of the container with a soft and slightly damp cloth, then allow it to fully dry.
4. Clean the filter with a slightly damp cloth, a soft brush or a conventional vacuum
cleaner if it is very dirty.
5. Reassemble the filtration unit as shown in figure 8 below.
6. Put the dust container back on the motor unit until it "clicks" into place, as shown in
diagram 9, and put the appliance back on its charging base.
7. Clean the outer surfaces of the appliance with a soft, slightly damp cloth and dry
them completely.
V.1.0
Diagram 7
Diagram 8
Diagram 9
28