Publicidad
Idiomas disponibles
Idiomas disponibles
DANZE ALWAYS RECOMMENDS THAT PLUMBING PRODUCTS BE INSTALLED BY A LICENSED PROFESSIONAL.
WARNING!
Do not rotate cartridge stem without trim in place or designated in the adjustment procedure.
1.
Before trim installation, make sure the
NOTE :
finished wall falls between the limits marked on the
plaster guard.
Remove the plaster guard from the 3/4" mixing valve.
2.
Place the gasket and escutcheon over valve stem and attach with
handle trim ring. Secure the wall escutcheon by rotating the handle
trim ring clockwise.
Note: locate the notch in the escutcheon at the bottom.
3.
Install limit stop, making sure the gun sight and notch on
the valve cartridge stem are all aligned (see illustration).
2
Operation Manual
© 2008 Danze, Inc. All rights reserved.
®
Publicidad
