Descargar Imprimir esta página

Safety Agency Compliance Statements; Safety Precautions; Modifications To Equipment; Noise Level - Sun Microsystems Fire X4100 Guia Del Usuario

Publicidad

Idiomas disponibles

Idiomas disponibles

Safety Agency Compliance
Statements
Read this section before beginning any procedure. The
following text provides safety precautions to follow when
installing a Sun Microsystems product.

Safety Precautions

For your protection, observe the following safety
precautions when setting up your equipment:
Follow all cautions and instructions marked on the
equipment.
Ensure that the voltage and frequency of your power
source match the voltage and frequency inscribed on
the equipment's electrical rating label.
Never push objects of any kind through openings in
the equipment. Dangerous voltages may be present.
Conductive foreign objects could produce a short
circuit that could cause fire, electric shock, or damage
to your equipment.
Symbols
The following symbols may appear in this book:
Caution – There is a risk of personal injury
and equipment damage. Follow the
instructions.
Caution – Hot surface. Avoid contact.
Surfaces are hot and may cause personal
injury if touched.
Caution – Hazardous voltages are present. To
reduce the risk of electric shock and danger to
personal health, follow the instructions.
Depending on the type of power switch your device has,
one of the following symbols may be used:
On – Applies AC power to the system.
Off – Removes AC power from the system.
Standby – The On/Standby switch is in the
standby position.

Modifications to Equipment

Do not make mechanical or electrical modifications to the
equipment. Sun Microsystems is not responsible for
regulatory compliance of a modified Sun product.
Placement of a Sun Product
Caution – Do not block or cover the openings
of your Sun product. Never place a Sun
product near a radiator or heat register.
Failure to follow these guidelines can cause
overheating and affect the reliability of your
Sun product.

Noise Level

Declared noise emissions in accordance with ISO 9296, A-
weighted, operating and idling:
Measure and
Environment
L
(1B = 10dB)
wAd
at or below 25C
at max ambient
L
bystander
pAm
at or below 25C
at max ambient
Sun Fire
Sun Fire
X4100
X4200
7.8 B
8.0 B
8.3 B
8.4 B
63 dB
66 dB
67 dB
69 dB
3

Publicidad

loading

Este manual también es adecuado para:

Fire x4100 m2Fire x4200Fire x4200 m2