Service Information - Black and Decker BDCF20 Manual De Instrucciones

Linterna led de 20 v máx
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS
ON/OFF BUTTON
1. TO TURN THE LIGHT ON, press the on/
off button (1).
2. TO TURN IT OFF, press the button again.
PIVOTING THE LIGHT HOUSING
(FIGURE D)
1. The LED light housing (4) can be pivoted
by lifting it to different positions within the
180 degree pivot range.
2. The LED flashlight can also be
positioned on the handle and battery ends
to provide a greater range of light coverage
as shown in FIGURE E.
D
E
MAINTENANCE
Use only mild soap and damp cloth to
clean the tool. Never let any liquid get
inside the tool; never immerse any part of
the tool into a liquid.
IMPORTANT:
SAFETY and RELIABILITY, repairs,
maintenance and adjustment (other than
those listed in this manual) should be
performed by authorized service centers or
other qualified service personnel, always
using identical replacement parts.
ACCESSORIES
WARNING:
The use of any accessory
not recommended for use with this tool
could be hazardous.
Recommended accessories for use with
your tool are available from your local
dealer or authorized service center. If you
need assistance regarding accessories,
please call: 1-800-544-6986.
To assure product

SERVICE INFORMATION

All BLACK+DECKER Service Centers are
staffed with trained personnel to provide
customers with efficient and reliable power
tool service. Whether you need technical
advice, repair, or genuine factory replacement
parts, contact the BLACK+DECKER location
nearest you. To find your local service
location, call: 1-800-544-6986 or visit
www.blackanddecker.com
®
The RBRC
The RBRC® (Rechargeable Battery
Recycling Corp oration) Seal on the
nickel cadmium, nickel metal hydride or
lithium-ionbatteries (or battery packs) indicates that
the costs to recycle these batteries (or battery packs)
at the end of their useful life have already been paid by
BLACK+DECKER. In some areas, it is illegal to place
spent nickel cadmium, nickel metal hydride or lithium-
ion batteries in the trash or municipal solid waste
stream and the Call 2 Recycle® program provides an
environmentally conscious alternative. Call 2 Recycle,
Inc., in cooperation with BLACK+DECKER and other
battery users, has established the program in the United
States and Canada to facilitate the collection of spent
nickel cadmium, nickel metal hydride or lithium-ion
batteries. Help protect our environment and conserve
natural resources by returning the spent nickel
cadmium, nickel metal hydride or lithium-ion batteries
to an authorized BLACK+DECKER service center or to
your local retailer for recycling. You may also contact
your local recycling center for information on where
to drop off the spent battery. RBRC® is a registered
trademark of Call 2 Recycle, Inc.
This Class B digital apparatus complies with Canadian
ICES-003.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
7
Seal

Publicidad

Tabla de contenido
loading

Tabla de contenido