Radio Mode; Sleep Operation - SOUNDMASTER HighLine UR8400 Manual De Instrucciones

UR8400 / English Instruction Manual
returns to time display after 5 seconds, and will display again the same info in
cycle.
Press and keep depressed over 2 seconds again to turn off AUTO CHANGE
DISPLAY mode (« OFF » will appear on the display).

RADIO MODE

Note: Ensure that the FM antenna is completely unrolled and extended to
have the best FM reception.
Press the Radio ON/OFF button (7) to turn the unit on.
Use the Tune - (3) or Tune + (5) button to select the desired radio station. If
you press and hold the Tune – (3) or Tune + (5) button for one second, then
release, the unit will automatically scan to the next broadcasting station.
Press the ON/OFF button (7) to turn the radio OFF.
To preset radio station
Press the Radio ON/OFF button (7) to turn the unit ON.
Use the Tune - (3) or Tune + (5) button to select the desired radio station.
Press the MEM.SET/M+ (6) button; "P02" will blink in the display.
Press the „MEM.SET / M+ (6) button again to set the preset.
Repeat steps 2 through 4 to set more presets.
The unit can preset 10 stations totally for FM.
When "P01-P10" blinks, press Tune – (3) or Tune + (5) button to select the
preset number.
To recall the radio preset
To recall a preset station, press MEM.SET/M+/NAP (6) button to select the
desired preset number.

SLEEP OPERATION

When you listen to the radio, press the SNOOZE/SLEEP/DIMMER (4) button
to enter into the sleep mode. You can adjust the sleep timer from 90 minutes to
15 minutes by pressing repeatedly the SNOOZE/SLEEP/DIMMER button (4).
When sleep timer is selected, the unit will automatically turn off once time is
up.