OSD Menu Operation
Press the ENTER button to bring up the OSD main menu to start operating
OSD menu.
1) LENS
Iris is mechanism which closes and opens allowing more or less light into
the lens.
The camera supports two types of lens:
MANUAL IRIS LENS:
Where the aperture is fixed or set manually by
the user. Iris is mechanism which closes and opens allowing more or
less light into the lens.
AUTO IRIS LENS:
In which the aperture is continuously controlled
by the camera to automatically set to the desired level of brightness.
• When using a camera with a normal lens – set the LENS mode to
MANUAL.
• When using an AUTO IRIS lens – set the LENS mode to AUTO.
- Scroll to LENS using ▲UP or ▼DOWN.
The LENS menu allows you to set the lens which attached to your
camera.
SETUP MENU
SETUP MENU 1
LENS
LENS
SHUTTER/AGC
SHUTTER/AGC
WHITE BAL
WHITE BAL
BACKLIGHT
BACKLIGHT
PICT ADJUST
<┘
PICT ADJUST
ATR
ATR
MOTION DET
MOTION DET
<┘
NEXT
NEXT
<┘
EXIT
EXIT
- Use ◄ or ► to select AUTO and press O to enter the AUTO IRIS menu.
5
MANUAL
AUTO
<┘
AUTO/MANUAL
AUTO
<┘
ATW
ATW .....
BLC
OFF
ON
OFF
ON
<┘
ON
(go to next page)
SAVE ALL
(to save)
SAVE ALL
- Use ▲ or ▼to scroll the setup page.
AUTO IRIS
TYPE
DC
MODE
AUTO
SPEED
0 |----------|----------|255
<┘
RETURN
- Use ◄ or ► to change different parameters:
TYPE
– you can select between 2 types of of the mechanical iris:
DC or VIDEO.
MODE
– Select to set the type of control to be exercised over the
mechanical iris. Adjusts the LENS mode to
CLOSE: The mechanical iris is fixed to close.
OPEN: The mechanical iris is fixed to open
AUTO: The mechanical iris is controlled automatically
SPEED
– Select to set the convergence speed of the mechanical iris.
Adjusts the iris control speed. The lower the value, the faster
the speed. If the speed is too slow or fast, the iris control
may be unstable.adjusts the speed 0 to 255
6