White Bal - Provision ISR EFFIO-E Serie Manual

3) WHITE BAL (White Balance)
White balance can be set to ATW, PUSH, USER1, USER2, ANTI CR,
MANUAL or PUSH LOCK.
ATW (Auto Tracking White balance) (default) and PUSH (Full pull-in) are
continuously monitoring/analyzing the color temperature of the incoming
light and correcting the white balance.
ATW limits the color temperature range at about 2,500˚K~8,500˚K to reduce
the excessive compensation for the big object which has a single color.
PUSH has no limits between about 1,800˚K~10,500˚K but it may
over-compensate the white balance for the big object which has a single
color.
In cases where it goes under 2,500˚K such as halogen light, ATW may stop.
USER1 and USER2 are a fixed white balance which is user -programmable
by R-GAIN and B-GAIN and useful only for the steady light.
ANTI CR (Anti Color Rolling) can reduce color rolling under the fluorescent
light.
Press the ENTER button to bring up the OSD main menu to start operating
OSD menu.
- Scroll to WHITE BAL using ▲ or ▼.
- Use ◄ or ► to select between the different modes: ATW/
PUSH / USER1 / USER2 / ANTI CR / MANUAL/PUSH LOCK :
11
SETUP MENU
LENS
SHUTTER/AGC
<┘

WHITE BAL

ATW
BACKLIGHT
PICT ADJUST <┘
ATR
MOTION DET
NEXT <┘
EXIT
3.1) ATW Auto Tracing White Balance
- Auto white balance of color, which tracks the changes of white at
the pictures in real time, comparing it with standard white color and
reproduce the colors without the need for manual setup.
- From main menu - Scroll to WHITE BAL using ▲ or ▼.
- Use ◄ or ► to select ATW and press O to enter ATW
MENU.
ATW
SPEED
DELAY CNT
ATW FRAME
ENVIRONMENT
<┘
RETURN
- Use ▲ or ▼ to navigate in the menu.
- Use ◄ or ► to change values of SPEED, DELAY CNT, ATW
FRAME and ENVIRONMENT,
Outdoor/Indoor.
AUTO
AUTO<┘
BLC
ON
ON <┘
SAVE ALL
0|-------|--------|255
0|------|---------|255
x2.00
INDOOR
according to your environment –
12