Vetus ILTCONW Instrucciones De Instalación Y Manual Del Propietario página 17

Fitting in sailing boats
When fitting remember that the filler hose
must always be positioned on the same side of
the boat as the tank.
6 Preparation
The tank must have a threaded connection.
ATANK tanks (42 to 390 liters)
An inspection cover ILT120 must be fitted to
these tanks.
Mounting inspection lid
• Mount the inspection lid ILT120, this is not
included in the supply. For installation in­
structions consult the manual supplied with
the inspection lid.
• Do not install the nut with the blind plate.
The blind plate is not used.
APT100 tanks
These tanks have already been fitted with a
collar with screw thread, remove the nut and
remove the blind plate and the gasket.
vetus® Connection kit for waste water tanks
This prevents too high a pressure from possibly
occurring in the tank when sailing heeled.
ENGLISH
ATANK...
APT100
17
110141.01