Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Quick Installation
Plug your UPS's detachable
1
line cord into the back of the
UPS and into a grounded
electrical outlet.
Plug your computer,
2
monitor and external
modem into surge/battery
protected (dark) outlets.
Plug nonessential equip-
ment such as scanners and
printers into surge protected
only (light) outlets.
Your UPS is designed to support only computer
equipment. You will overload your UPS if you
connect household appliances, laser printers or
surge suppressors to the battery-supported
outlets.
—Optional Installation—
Phone Line Connection
Using telephone cords, connect your wall jack
to the UPS jack marked "IN". Connect your
equipment to UPS jack marked "OUT".
†
A phone line connection is optional. Your UPS will
function properly without this connection. Make sure the
equipment you connect to your UPS's telephone jacks is
also protected against damaging surges on the AC line.
Press the MASTER Switch
3
and release.
If you have equipment plugged into the individually
switched outlets on the back of your UPS, you
must press and release the corresponding
switches to activate power at those outlets.
9910163 Internet Office LP 93-1468.p65
†
UPS
3
OUT
IN
MASTER
SELF TEST
ALARM
SILENCE
6/20/00, 10:37 AM
3
Publicidad
Tabla de contenido
