Technical Specification - RISCO Group Panda RW332KP Manual De Instrucciones

6. Reconnect the battery cable to the battery connector.
7. Close the battery compartment cover, place the keypad back on the wall and secure
the screw to its place.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose
of used batteries according to local regulations.
CHANGING KEYPAD PARAMETERS
Any change performed in the definition of the keypad parameters also requires
updating the keypad. This is performed by pressing the
panel will then send an update to the keypad.

TECHNICAL SPECIFICATION

Electrical
Battery Type
Current Consumption
Power Output
Frequency
Modulation Type
Typical Battery Life
Low battery indication
Proximity RF frequency
Physical
Dimension (HxWxD)
Weight (Including batteries)
Environmental
Operating temperature
Storage temperature
Humidity Range
Standard Compliance
CR123, 3V Lithium battery (x 4)
RW332KPP8BTA: 3V, 10 Ah flat Lithium battery (x 1)
Standby current 9µA, Max current 150 mA
868.65MHz: 10 mW
433.92, 868.65, 915 MHz
OOK
3 years
2.6 V
13.56 MHz
178 x 103 x 38 mm (7 x 4.1 x 1.5")
0.435 kg
-10°C to 55°C (14°F to 131°F)
-20°C to 60°C (-4°F to 140°F)
Average relative humidity: 75%
EN 50131-1, EN 50131-3 Grade 2, Environmental Class
II, EN 50131-6 Type C, EN 50131-5-3
9
key for 2 seconds. The