Step 7 Install Filters; Step 8 Finalize Installation - Monogram 31-10719-3 Instrucciones De Instalación

STEP 7 INSTALL FILTERS

1. Remove protective film from the filters.
Clip
2. Tip the filter into the back tab slots and lift up.
While maintaining slight backward pressure
on filter, open clip and press into place with
two hands.
Clip
3. To remove, support filter with one hand while
pulling filter clip down with the other.
Installation Instructions
22

STEP 8 FINALIZE INSTALLATION

1. Check to be sure all tape and packaging
materials have been removed.
2. Refer to Owner's Manual for operating
instructions.