Hama RC200 Instrucciones De Uso página 6

Note - Time settings
• If, during initial setup of the device, no DCF radio signal is received within the rst few minutes, the
search is aborted. The radio icon (6) will go out.
• If there are reception problems, we recommend leaving the clock to sit overnight, since interference is
generally less at night.
• In the meantime, you can start a manual search for the DCF radio signal at another location or you can
manually set the time and date.
• The clock automatically continues to search for the DCF signal every hour. If the signal is received
successfully, the manually set time and date are overwritten.
Note - Manual search
• The manual search is automatically aborted after 3-5 minutes.
• Using the wave °C/°F/WAVE (10) frequently will drain the battery. We recommend only using this
function to seek out an optimal location for the device.
Note - Summer time
The clock automatically switches to summer time.
activated.
5.2. Manually setting the date/time
• Press and hold the MODE button (11) for approx. 3 seconds until the hours display begins to ash.
• Set the following information in the order listed:
• Hours (2)
• Minutes (2)
• Year (5)
• Month (4)
• Day (3)
• To select the individual values, press the ▲ button (13) or the
pressing the MODE button (11).
• Press the MODE button (11) immediately to adopt the set value displayed and skip ahead.
• If you do not make an entry for 30 seconds, you automatically exit the setup mode.
Weekday
• To change the language in which the weekday is displayed (5), press the
current language will be displayed.
• Hold down the
Note - Day of the week
You can choose German (GE), English (EN), Italian (IT), Spanish (SP) or French (FR) for the weekday display.
button (12) to change to the other languages.
S appears on the display as long as summer time is
button (12) and con rm each selection by
button (12) for 3 seconds. The
5