Klarstein 10011485 Instrucciones De Uso página 20

The cleaning of the carbon grease filter mesh
The filter mesh is made of high-density stainless steel. Please do not use the corrosive detergent on
it. Keeping this filter clean will keep the appliance running correctly. Please strictly follow the guide-
lines below.
Method 1: Put the mesh into 40-50 c clean water, pour on detergent, and soak for 2-3 mins. Wear
gloves and clean with a soft brush. Please do not apply too much pressure, as the mesh is delicate
and will damage easy.
Method 2: If instructed to do so, it can be put into a dishwasher, set the temperature at around 60
degrees.
Notice of cleaning cooker hood
A. To protect the main body from corrosion over a long period of time, the cooker hood should be
cleaned with hot water plus non corrosive detergent every two months.
B. Please do not use abrasive detergent for it will damage the body.
C. Keep the motor and other spare parts free from water, as this will cause damage to the appliance.
D. Before cleaning the appliance please remember to cut off power
E. The carbon filter shouldn't be exposed to heat.
F. Please don't tear open the fixed bar around the carbon filter
G. If the plug or cord is damaged, please replace it with special soft cord.
Installation of the carbon filter
Remove the grease filters
The charcoal filters are located at both end of the motor. Turn the charcoal filters until they are
unscrewed
Maintenance