Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MAX at the inside located water level scale. Overfilling may cause hazard of scalding by
boiling and squirting water.
•
In order to fill in water, lift off the reservoir from the base station. Take care not to let water
run over the appliance when filling. Ingress of moisture into the electric parts causes short
circuit and damage.
•
Always watch the appliance during operation. After each use, unplug.
•
Danger of burning! The appliance gets very hot during operation. During operation of
electrical caloric appliances, high temperatures – by boiling water, hot steam or hot body
– are generated, which may cause injuries. Only touch the cool touch handle to open or
close! Never touch lid or housing!
•
Do not open the lid while water is boiling! Danger of scalding!
•
Never move the unit while it is hot. Let the unit cool down enough before cleaning and storing.
•
Caution! Always keep enough distance to heat or steam sensitive surface, walls, furniture.
•
Ensure that the cord does not touch hot parts of the appliance like lid or housing.
•
Note: Never use the appliance outside and always place it in a dry environment. The
appliance is not suited for outside use. Moisture can damage the appliance.
•
To avoid damage and scratches on the stainless steel surface never use sharp edged or
metallic objects for cleaning.
•
Do not use this water kettle for other purpose as for cooking water.
•
Note: Heat up the water in the appliance only once. Completely pour out the water after
boil up. Don't let water remain in the appliance to avoid calcifying.
•
Keep the appliance clean as it is in contact with drinking-water.
Cleaning and storing
•
Always pull the plug before cleaning.
•
Let the appliance cool down enough, before cleaning and storing it.
•
Caution: Never immerse the water kettle and the base fully into water. The connector
parts must not get wet. Contact of electrical parts with moisture causes short circuit and
damage. Danger of electrical shock!
•
Do not wind the cable around the appliance.
•
Never store the cable before the appliance has cooled down completely.
•
Never use metallic or sharp edged cleaning material or sharp cleaning solvents while cleaning.
S
c
o
p
e
o
f
d
e
l
i
v
e
r
y
S
c
o
p
e
o
f
d
e
l
i
v
e
r
y
Water kettle
Base station
Instruction manual
B
e
f
o
r
e
t
h
e
f
i
r
s
t
u
s
e
B
e
f
o
r
e
t
h
e
f
i
r
s
t
u
s
e
•
Remove all packaging material such as carton and foils.
•
Unroll the cord completely.
•
Clean the stainless steel surface with a slightly damp cloth and dry thoroughly.
•
If necessary boil some water, empty and rinse the water kettle afterwards to remove
production residues that might be inside. Always take care not to let water run into the
electric parts of the unit.
12
Publicidad
Capítulos
Tabla de contenido
