Installation Parts - Coway AQUAMEGA 100 Manual Del Usuario

INSTALLATION
TYPE
Installation
parts
(1)
(2)
Installing
your
product
∗ Caution : Be sure to seal the
diverter tightly. Otherwise,
water may leak.
(3)
PUSH
FITTING
TYPE 1
M22XP1.0
M22XP1.0
(1)
Open the water
outlet cap of the
water faucet by
turning it.
(2)
Connect
diverter to water
∗ Caution : If the seal or o-ring is
faucet by hand
missing or the connector is not
tightening
properly installed, water may leak
(3)
Connect the tubing
∗ Caution : If the seal is missing
for the feed water
or the ring nut is not properly
for the water
installed, water may leak.
purifier to the
fitting by inserting
(4)
TUBING
it into the fitting
fully. After the
installation, operate
the valve to check
if the valve works
properly and no FITTING
water leaks. check if the valve works properly and
no water leaks.
TYPE 2
0.7205-28 UNF
③0.7205-28 UNF ①0.8071-28 UNF ②0.9213-28 UNF
(1)
Open the water
outlet cap of the
water faucet by
turning it.
(2)
If the provided
diverter does not
fit, use diverter
adapter ③ and try
to connect again.
∗ Caution : If the seal or o-ring is
Fasten the ring nut
(3)
of the diverter to the
installed connector.
At this time, confirm
that the seal is properly
installed in the ring nut.
∗ Caution : If the seal is missing
Connect the tubing
(4)
for the feed water for
the water purifier to
TUBING
the fitting by inserting
it into the fitting fully.
After the installation,
PUSH
operate the valve to
check if the valve works properly and
no water leaks.
TYPE 3
①0.8071-28 UNF
②0.9213-28 UNF
Open the water
outlet cap of the
water faucet by
turning it.
If the diverter
adapter ③ does
not fit, use diverter
adapter ① or ②
and connect again.
missing or the connector is not
properly installed, water may leak
Fasten the ring nut
of the diverter to the
installed connector.
At this time, confirm
that the seal is properly
installed in the ring nut.
or the ring nut is not properly
installed, water may leak.
Connect the tubing
for the feed water for
the water purifier to
TUBING
the fitting by inserting
it into the fitting fully.
PUSH
After the installation,
FITTING
operate the valve to
11
12