General Directions - AEB 466 Manual Instrucciones De Montaje Y Garantia

We advise you to fix the Emulator in a vertical position, away from
possible water infiltrations and excessive heat sources ( for example:
exhaust manifolds), so as to avoid to irreparably damage the
Emulator.
To avoid bad workings of the Emulator we advise you to:
- pass the Emulator wires away from the high tension wire;
- make good connections. Please, pay attention that the best
connection you can do is a duly insulated welding.
Please advise the client that in event of a GAS electric system
breakdown, the Emulator automatically resets the original
connection.
Do not absolutely open the Emulator box, especially when the
engine is running or the board panel is inserted. A.E.B. srl declines
every responsabilities for damages caused to things or person
which derive from the tampering of its own device provoked
by unauthorized persons.
Technical Specifications
Feeding Tension
Overal dimensions of the
Electronic Advance Variator
Box
11 - 20

General directions

10 ÷ 14 Vdc
height
depth
width
Ø fixing hole
English
60 mm
29 mm
41 mm
5 mm
IS 466-0 REV. 081105-0