Safety Instructions - Axis Q86–E Serie Guia De Instalacion

AXIS Q86–E Series

Safety Instructions

WARNING
• The Axis product shall be installed by a trained professional.
CAUTION
• Risk of injury. The product shall be installed so that it is accessible only for authorized
personnel due to moving parts during operation.
• The Light Sensor Box delivered with this equipment (not valid for 24 V AC) is to be
installed in a Restricted Access Location (RAL).
NO TICE TICE
NO NO TICE
• The Axis product shall be used in compliance with local laws and regulations.
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to shocks or heavy pressure.
• Do not install the product on unstable brackets, surfaces or walls.
• Use only applicable tools when installing the Axis product. Using excessive force with
power tools could cause damage to the product.
• Do not use chemicals, caustic agents, or aerosol cleaners.
• Use a clean cloth dampened with pure water for cleaning.
• Use only accessories that comply with technical specification of the product. These can be
provided by Axis or a third party.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product by yourself. Contact Axis support or your Axis
reseller for service matters.
• A readily and easily accessible disconnecting device must be incorporated in the electrical
system of the building for rapid intervention.
• This is a permanently connected equipment (field wired). The short-circuit and overcurrent
protection is provided in the building installation and it shall be of maximum 20 A.
Transportation
NO NO TICE NO TICE TICE
• When transporting the Axis product, use the original packaging or equivalent to prevent
damage to the product.
6