Descargar Imprimir esta página

Philips Jamie Oliver HomeCooker HR1050 Manual De Usario página 25

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
Possible cause
The HomeCooker may
produce some smoke when
you use it for the first time.
The stirrer blocks.
You put too many ingredients
in the pot.
During roasting a piece
of meat got stuck on the
bottom of the pot.
The message
An error has occurred.
'Err' appears on
the display of the
HomeCooker.
The display of the
This is possible.
HomeCooker
shows °C, but
I want to work
with °F.
The Cutting Tower
The Cutting Tower is not
does not work.
plugged in.
The Cutting Tower is not
assembled properly.
The mains cord is damaged.
I cut some
It is possible that cooked
ingredients with
and/or very soft ingredients
the Cutting Tower,
get mashed when you use the
but the ingredients
Cutting Tower to cut them.
are mashed.
The Cutting Tower
You are processing ingredients
is clogged.
that are too hard or too soft.
Recipe
Parmesan crackers
-
250g of Parmesan cheese
1
Shred the Parmesan (without rind) with the shredding disc.
2
Place small heaps of Parmesan on a baking tray and bake them in a
preheated oven (200°C) for 8 minutes.
Solution
It is normal for a new appliance to produce an
unpleasant smell or emit some smoke when it is
first used. This phenomenon stops after you have
used the HomeCooker a few times.
Remove the ingredients and give the stirrer a light
push. Do not overload the pot.
Give the stirrer a slight push.
Have the appliance checked by a service centre
authorised by Philips.
Press the temperature increase and decrease
button at the same time for 3 seconds to switch
from °C to °F and back again.
Put the plug in the wall socket.
The Cutting Tower only works if the bowl with
spout and the lid with feeding tube are fixed and
locked. Check if the lid with feeding tube and the
bowl with spout are properly fixed and locked.
If the mains cord is damaged, you must have it
replaced by a service centre authorised by Philips.
Do not process very soft ingredients in the
Cutting Tower.
Unplug the Cutting Tower, remove the lid with
feeding tube and gently remove the ingredients
with a spoon or spatula.
EnglisH
25

Publicidad

loading