Part Number: 91800
Rated Line Pull: 9,500 lbs. (4309 kgs)
Motor: 12V DC, Series Wound
Controls: Remote switch with thermometric LED, 12' (3.7m) Lead
Gear train: 3-Stage Planetary
Gear Ratio: 156:1
Clutch (Freespool): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum diameter/length: 2.5"/8.9" (6.4 cm/22.6 cm)
Kit Shipping Weight: 100 lbs (45.4 kgs)
Rope: Wire rope, Ø 5/16" x 125' (Ø 8mm x 38.1m)
Fairlead: Roller
Recommended Battery: 650CCA Minimum for winching
Duty Cycle: Intermittent
Battery leads: 2 GA, 72" (1.82m)
Air Reservoir: 1/2 gallon with integrated air intercooler
High Air Flow Rating: 12 CFM @ 0 psi, 5 CFM @ 90 psi
Max Air Pressure: 100 psi
Finish: Flat Black Powder Coat
Warranty: Limited Lifetime
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)
Winch Dimensions: 24.35 L x 6.7" D x 13.48" H (618mm L x 179mm D x 342mmH)
WARN Industries, Inc.
POWERPLANT 9.5
SERVICE INSTRUCTIONS
Should you encounter a problem during installation or operation of your winch, please follow
these steps toward resolving the problem:
1.
Refer to your operator's guide and installation instructions. It has illustrations and detailed
information on the installation and safe and proper operation of your winch. It also includes
a replacement parts list and assembly diagrams. If you are unable to resolve the problem,
then go to step 2.
2.
Contact your dealer where you purchased your winch. If, after discussing the problem with
their parts and service staff , you are still unable to resolve the problem then go to step 3.
3.
Call an Authorized WARN Service center from the list provided on the back of the warranty
sheet included with the product. When calling, please have the following information
available: winch model number and purchase date, make, model and year of vehicle.
4.
If you are unable to resolve the problem to your satisfaction, please call Warn Industries
Customer Service at: 1-800-543-9276. When calling, please have the following information
available: winch model number and purchase date, make, model and year of vehicle. You
may also contact Warn Industries by visiting our website: www.warn.com
SERVICE/UPGRADE KITS
KIT NO.
9.5/HP
Item
1
91828
2
91832
3
91834
91696A1
WARN Industries, Inc.
Description
S/P Geartrain 156:1
1
SHCS, 10-24 x 2.25"
(2)
S/P End Housing
4
Sun Gear
5
Drive Shaft
6
Carrier Assy, Stage 1
7
Carrier Assy, Stage 2
8
Ring Gear, Sliding
9
Washer, Thrust
10
Carrier Assy, Stage 3
11
Drive Spline
12
Gasket, Housing
13
Ring Gear
14
Gasket, Ring Gear
S/P End Housing
1
SHCS, 10-24 x 2.25"
2
Clutch Lever
3
End Housing
8
Ring Gear, Sliding
12
Gasket, Housing
S/P Drum Support, Geartrain
12
Gasket, Housing
16
Drum Support, Geartrain
20
Drum Bushing
21
Drum Seal
91696A1