Hammerhead SWITCH HHS1200 Manual De Instrucciones página 12

OPERATING INsTRUCTIONs
4. LED Worklight
a. The LED worklight, located on the
head of the tool, illuminates when
the trigger switch is depressed.
This provides additional light on
the surface of the workpiece for
operation in lower-light areas.
b. The LED worklight will turn
off when the trigger switch is
released.
c. This tool is equipped with a fuel
gauge that indicates the charge
remaining in the integrated battery.
If the fuel gauge displays a red light, it indicates that the battery needs to be charged.
5. function switch
Impact Driving Mode
Auto Hammer Mode
Set the function switch to Impact
driving mode, marked
tightening or loosening screws and
nuts or drilling.
Set the function switch to auto
hammering mode, marked with
for hammering nails.
12
4
GAUGE
5
for
5
SWITCH™_12V rIgHT aNgLE IMPaCT DrIVEr – auTO HaMMEr
fUEL
IMPACT DRIVING MODE
AUTO HAMMER MODE
LED