Important - Hammerhead SWITCH HHS1200 Manual De Instrucciones


sAfETY INfORMATION
Know the Tool
To operate this tool, carefully read this manual and all labels affixed to the impact driver/
auto hammer before using it. Keep this manual available for future reference.
Some of the following symbols may be used on this tool. Please study them and their
meaning. Proper interpretation of these symbols will allow you to operate the tool better
and more safely.
sYMbOL DEfINITION
V Volts
a amps
Hz Hertz
W Watts
a danger, warning or caution.

It means 'ATTENTION! Your
safety is involved.'
IMPORTANT: This tool should only be serviced only by a qualified service technician.
General Power Tool safety Warnings

WARNING
read all safety warnings and all instructions. failure to follow all warnings and instructions
may result in electric shock, fire and/or serious injury.
save all warnings and instructions for future reference
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work Area safety
• Keep work area clean and well lit. Cluttered and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
4
sYMbOL DEfINITION
n No-load Speed
0
revolutions, Strokes, beats or
/min
Impacts per Minute
⧈
Class II Construction

Direct Current

alternating Current
SWITCH™_12V rIgHT aNgLE IMPaCT DrIVEr – auTO HaMMEr