Declaration Of Conformity - CAME DBCT Manual De Instrucciones

Example for DBS 02 Series
K K
K K
1 2 3 4
Transmitter left side of
motor dip-switch 3 set at
ON and Receiver with dip-
switch 2 set at ON
Transmitter Installation
Refer to the DBS01/02 instructions for the position and
connection to the sensitive edge and then:
• Secure the base of the transmitter , using the supplied
UNI6954 3.9x32 screws .
Transmitter right side of
motor dip-switch 1 set at ON
and Receiver with dip-switch 1
set at ON
24V 0 TS TS C NC
K K
• Once it has been connected
to the sensitive edge, select the
photodiode (see the example
alongside and on the previous
page) and install the batteries
(4 x 1.5V AAA) checking the
polarity on the board.
K K
K K K K
• Close the device, hooking the cover on from the top
1 2 3 4
and use the supplied screws
Demolition and Disposal
PRODUCT DISPOSAL – Our products and packaging are
made up of various types of materials. Most of them (paper,
plastics, etc.) may be disposed of in normal garbage collection
bins and can be recycled by disposing of in specifi c recyclable
material collection bins and disposal in authorized centres.
Batteries and any other materials containing hazardous
substances, however, should be removed and given to qualifi ed
Prior to disposal, it is always advisable to check specifi c
regulations in force in the place of disposal.
Manufacturer's declaration

Declaration of conformity

la CAME Cancelli Automatici S.p.A.
via Martiri della Libertà, 15
31030 Dosson di Casier - Treviso - ITALY
internet: www.came.it - e-mail: info@came.it
Declare under their own responsibility that the following
products for gate and garage door automation called:
Are compliant with essential requirements and with pertinent
regulations established by the following directives and to the
applicable parts of the standards listed below:
Electromagnetic compatibility directive 2004/108/CE
Electrical equipment designed for use within certain voltage
limits directive 2006/95/CE
EN 61000-6-1
EN 60335-1
119RU83 ver 0.1 - 09/2008
to secure it in place.
service companies for proper disposal.
PLEASE DISPOSE OF PROPERLY!
DBCT
EN 61000-6-2
EN 13241-1
K
K K
EN 61000-6-3
L'amministratore delegato
Sig. Gianni Michielan