GBD SC130 Instrucciones Para La Instalación página 12

12
UK
STEP-BY-STEP
OFF ON
STEP-BY-STEP
WITH PAUSE
IN OPENING,
ON ON
TEST
Push the button P1 for 2 s when you turn it on, the control unit starts in OPEN.
Once reached the OPENING limit switch starts again in CLOSING. Once reached the CLOSING limit switch it stops.
In this way you have the correct control unit/motor operation.
TRANSMITTERS LEARNING
Push the button P1, the control unit will enter in LEARNING (the led blinks, then turns on fixed), push the buttons
of the transmitter to store:
• START function will be assigned to the first button pushed of a new transmitter.
• PEDESTRIAN function will be assigned to the second button pushed of the same transmitter.
It is possible to store in sequence some new transmitters as long as the led is turned off fixed.
After the learning of last transmitter, it is necessary to wait that led turns off (3s), indicating the system is ready to work
in a normal way.
WARNING: After learning the first transmitter, the system will accept only that family of codes (if the first one
is Rolling, all the transmitters must be Rolling). It can learn 30 transmitters, when you arrive to the 31st the led blinks
because the memory is full.
Automatic closing enabled.
Operation in reply to a START
command:
• Gate close: OPEN.
• During opening: STOP.
WITH STOP
• Gate open: STOP.
AND
• During closing: STOP.
AUTOMATIC
• After a STOP: It is necessary
CLOSING
a command and the motion starts
again in the opposite direction
of the previous motion.
Automatic closing enabled.
Operation in reply to a START
command:
• Gate close: OPEN.
INVERSION
• During opening: PAUSE,
IN CLOSING
the gate stops and the timer of the
AND
automatic closing starts.
AUTOMATIC
• Gate open: CLOSE.
CLOSING
• During closing: Inverts the motion.
Automatic closing disabled.
Operation in reply to a PEDESTRIAN
command:
• Gate close: OPEN for 7s.
• During opening: STOP.
• Gate open: CLOSE.
• During closing: STOP.
• After a STOP: It is necessary
a command and the motion starts
again in the opposite direction
of the previous motion.
Automatic closing enabled
(if DIP8=OFF).
Operation in reply to a PEDESTRIAN
command:
• Gate close: OPEN for 7s.
• During opening: PAUSE
(if DIP8=OFF), the gate stops and the
timer of the automatic closing starts.
STOP (if DIP8=ON).
• Gate open: CLOSE.
• During closing: STOP.
• After a STOP: It is necessary
a command and the motion starts
again in the opposite direction
of the previous motion.
SC130