Sterling 6500 Serie Manual Del Usuario página 12

Reverse Side
If necessary, loosen
clamp screws slightly to fit
wall jamb behind clamps.
Wall Jamb
Hinge Jamb
Reverse for right hinge.
9. Install the Door Panel and Magnet
NOTE: You may need to loosen the clamp screws slightly to allow the wall jamb to fit behind them.
Slide the hinge jamb into the other wall jamb. Each slot in the hinge jamb will slide over the screw
body and fit between the clamp and wall jamb.
Tighten the four adjustment screws until snug.
IMPORTANT! The door panel magnet is the shorter of the two supplied magnets.
Install the provided magnet groove side out.
Use a pliers to crimp the bottom end of the door panel groove to secure the magnet.
1034028-2-E
Door Panel
Assembly
12
Shortest Magnet
Groove Side Out
Sterling