Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Tools and Materials
Masking
Silicone
Tape
Sealant
Center
Punch
File
Assorted
Screwdrivers
Thank You For Choosing Sterling
We appreciate your commitment to Sterling value. Please take a few minutes to review this manual before
you start installation. If you encounter any installation or performance problems, please don't hesitate to
contact us. Our phone numbers are listed within this manual. Thanks again for choosing Sterling.
Before You Begin
CAUTION: Risk of personal injury. Always wear safety glasses when cutting materials.
IMPORTANT! Record the model number on the Homeowners Guide if you intend to save it, or in your
records for later use. The proper model number will enable our customer service representatives to quickly
help you if needed.
NOTE: When using a retractable case tape measure, add the length of the case to the measurement or
measure in a manner that excludes the case.
Your new Sterling door can be installed with the door opening to either the right or left. Install the
door with the pivot side away from the showerhead for best results.
Before starting the installation, lay out and identify all of the parts. Inspect them for damage.
Closely follow the instructions pertaining to the sealant application on the door. Sealing areas other
than those shown may cause leaking.
Two people should perform this installation.
Sterling reserves the right to make revisions to the design of products without notice, as specified in
the Price Book.
Determine the Door Configuration
IMPORTANT! Install the pivot side of the door on the side opposite the showerhead.
Determine whether the door will pivot on the right or left side.
Make sure the door can swing freely in the chosen configuration.
1034028-2-E
Tape
Measure
Drill and
Assorted
Drill Bits
Miter Saw or Hacksaw with
32 Teeth per Inch Blade
Knife
Level
Pencil & Felt
Tip Marker
Claw
Hammer
Safety Glasses
Miter Box
2
Plus:
• Drop Cloth
Caulk Gun
Sterling
Publicidad
Tabla de contenido
