Operating Time - Makita XRM11 Manual De Instrucciones

For United States:
Cautions to the user
The changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
RF exposure statements
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance
requirements, the antenna (s) used for this transmitter
must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located
or operating in conjunction with any other antenna or
transmitter. No change to the antenna or the device
is permitted. Any change to the antenna or the device
could result in the device exceeding the RF exposure
requirements and void user's authority to operate the
device.
Note:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to

OPERATING TIME

* The suitable battery packs for this radio listed as the following table.
* The following table indicates the operating time on a single charge.
Battery capacity
1.5Ah
2.0Ah
3.0Ah
4.0Ah
5.0Ah
6.0Ah
WARNING:
Only use the battery cartridges listed above. Use of any other battery cartridges may cause injury and/or fire.
NOTE:
● Table regarding to the battery operating time above is for reference.
● The actual operating time may differ with the type of the battery, charging condition, or usage environment.
Battery cartridge voltage
10.8V–12Vmax
BL1016
BL1021B
BL1041B
part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and
receiver.
● Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV
technician for help.
18V
BL1815N
BL1820B
BL1830
BL1830B
BL1840B
BL1850B
BL1860B
6 ENGLISH
AT SPEAKER OUTPUT = 100mW
Unit: Hour (Approximately)
Bluetooth
8.5
7.5
11
10
14
22
20
26
32
AUX IN
9.5
8.5
12
11
16
25
22
29
35