Makita XRM11 Manual De Instrucciones página 9

● If "XRM11" shows in your Bluetooth device list but
your device cannot connect with it, please delete the
item from your list and pair the device with the speaker
again following the steps described previously.
● Optimum Bluetooth streaming range is roughly 10
meters (30 feet) (line of sight) to the speaker but
distance up to 30 meters (100 feet) are possible.
● If Bluetooth connection is lost due to exceeding time of
separation, exceeding the optimum distance, obstacles
or otherwise, reconnecting your device with the
speaker may be necessary.
● Physical obstacles, other wireless devices or
electromagnetic devices may affect the connection
quality.
● Bluetooth connectivity performance may vary
depending on the connected Bluetooth devices. Please
refer to the Bluetooth capabilities of your device before
connecting to the speaker. All features may not be
supported on some paired Bluetooth devices.
Playing audio files in Bluetooth mode
When you have successfully connected the speaker with
the chosen Bluetooth device you can start to play your
music using the controls on your connected Bluetooth
device.
1. Once playing has started adjust the volume to the
required setting using the Volume buttons on the
speaker or on your enabled Bluetooth device.
2. Use the controls on your Bluetooth device to play/
pause and navigate tracks. Alternatively, control the
playback using Play/Pause, Next track and Previous
track buttons on your speaker.
3. Press and hold the Fast-forward button or Rewind
button to move through the current track. Release the
button when the desired point is reached.
Note:
● Not all player applications or devices may respond to
all of these controls.
● Some mobile phones may temporarily disconnect from
the speaker when you make or receive calls. Some
devices may temporarily mute their Bluetooth audio
streaming when they receive text messages, emails or
for other reasons unrelated to audio streaming. Such
behavior is a function of the connected device and
does not indicate a fault with the speaker.
● The display will show the track information such as title,
artist, album, etc., when playing in Bluetooth mode.
Playing a previously-paired Bluetooth
source device
The speaker can memorize up to 8 sets of paired device,
when the memory exceed this amount, the oldest pairing
history will be over written. If your Bluetooth device
already paired with the speaker previously, the unit
will memorize your Bluetooth device and it attempts
to reconnect with a device in memory which is last
connected. If the last connected device is not available,
the speaker will be discoverable.
Disconnecting your Bluetooth device
Press and hold the Bluetooth pairing button for 2-3
seconds until "Pairing" is shown on the display to
disconnect with your Bluetooth device or turn off Bluetooth
on your Bluetooth device to disable the connection.
Deleting Bluetooth paired device
memory
To clear the memory of all paired devices, press and hold
the Bluetooth pairing button for more than 5 seconds until
you hear two beeps.
TRUE WIRELESS STEREO
(TWS) FUNCTION
True wireless stereo (TWS) is a feature that allows one
device to wirelessly connect with another device. You can
use the TWS function to connect it to a second XRM11
and play your music through two speakers.
Set up the first speaker
1. Make sure the first speaker is in Bluetooth mode and
connect to a Bluetooth device.
2. Press the Plus button, the display will show
will flash on the display. Press the Plus button to
ST
enter the "ST Pair" mode. If no buttons are pressed for
10 seconds, the speaker will also enter the "ST Pair"
mode. The display will show "ST Pair" and "Pair" will
flash 1 minute.
Set up the second speaker
1. Make sure a second speaker is in Bluetooth mode.
2. Press the Plus button, the display will show
will flash on the display. Press the Plus button to
ST
enter the "ST Pair" mode. If no buttons are pressed for
10 seconds, the speaker will also enter the "ST Pair"
mode. When the connection is successful,
be shown on both displays at the same time. The EQ
setting will revert to Flat mode (initial setting).
Note:
Set up the second speaker within 1 minute. If you do not
set it up within 1 minute, the setting of the first speaker will
be canceled.
Start playback
1. Start playback on the connected Bluetooth device and
adjust the volume on the Bluetooth device or one of the
speakers for comfortable listening.
9 ENGLISH
.
ST MULTI
.
ST MULTI
will
L - ST - R