Brush Heads - Braun Oral-B GENIUS X Manual Del Usuario

White (default) = Operating and visual timer light
(choose individual color via Oral-B™ App settings)
Red = Pressure sensor light
Blue = Bluetooth® pairing indicator
Timer
The timer signals with a short stuttering sound and a
flashing light of the Smart Ring at 30-second intervals
to move to the next quadrant of your mouth (picture ➂).
A long stuttering sound and a flashing light indicate the
end of the professionally recommended 2-minute
brushing time.
The timer memorizes the elapsed brushing time, even
when the handle is briefly switched off during brushing.
The timer resets if pausing longer than 30 seconds,
briefly pressing the mode button (4) during pause or
placing the handle on the plugged-in charger.
Note: During the use of the Oral-B™ App, the timer
may be deactivated for some features.
Note: You can also customize the timer settings via
Oral-B™ App.
Pressure sensor
If too much pressure is applied, the Smart Ring (2) will
light up in red, reminding you to reduce pressure.
Constant high pressure for more than 5 seconds is
indicated with a fast flashing Smart Ring (2). In addition
the pulsation of the brush head will stop and the
oscillation movement of the brush head will be reduced
(during «Daily Clean», «Pro Clean» and «Sensitive»
mode) (picture ➂).
Periodically check the operation of the pressure sensor
by pressing moderately on the brush head during use.
Note: During the use of the Oral-B™ App, the pressure
sensor may be deactivated for some features.
Brushing modes
Your toothbrush offers different brushing modes
indicated on the brushing mode display (6) on your
handle («Daily Clean» mode does not illuminate on the
brushing mode display):
«Daily Clean» – Standard mode for daily
«Pro Clean» – For an extraordinary clean
«Sensitive»
– Gentle, yet thorough cleaning
«3D White»
– Polishing for occasional or
«Gum Care»
– Gentle massage of gums
«Tongue Clean» – Tongue cleaning for occasional
When operating the «Tongue Clean» mode, we
recommend using the «Sensitive» brush head. You can
brush your tongue either with or without toothpaste.
Brush the whole area of your tongue systematically in
8
cleaning
feeling (operated with a higher
frequency)
for sensitive areas
everyday use
or everyday use
gentle movements. The recommended brushing time is
20 seconds; indicated with a flashing light of the Smart
Ring.
Your toothbrush automatically starts in the mode
selected last. To switch to other modes, successively
press the mode button during use (picture ➃). To return
from any mode back to «Daily Clean» mode, press and
hold the mode button (4).
Note: You can also customize the mode settings via
Oral-B™ App.

Brush heads

Oral-B offers you a variety of different Oral-B brush
heads that fit your Oral-B toothbrush handle.
Our oscillating-rotating brush heads can be used for
tooth-by-tooth precision cleaning.
Oral-B CrossAction brush head
Our most advanced brush head. Angled
bristles for a precise clean. Lifts and
powers away plaque.
Oral-B FlossAction brush head
features micropulse bristles that allow for
an outstanding plaque removal in the
interdental areas.
Oral-B 3D White brush head
features a special polishing cup to
naturally whiten your teeth. Please note
that children under 12 years old should
not use the Oral-B «3D White» brush
head.
Oral-B Sensi Ultrathin brush head
features a combination of regular bristles
to clean teeth surfaces and ultrathin
bristles for a gentle brushing experience
on the gumline.
Most Oral-B brush heads feature light blue
INDICATOR® bristles to help you monitor brush head
replacement need. With thorough brushing, twice a day
for two minutes, the blue color will fade halfway
approximately within 3 months, indicating the need to
exchange your brush head. If the bristles splay before
the color recedes, you may exert too much pressure on
teeth and gums.