Publicidad
Step 26
To insert the drawers into your unit, tip the front of the drawer down slightly and drop the rollers on the drawer behind the
å
rollers on the unit. Lift the front of the drawer up and slide it into the unit.
To make adjustments to the drawer, loosen the SCREWS in the DRAWER FRONT BRACKETS, make needed adjustments,
å
and tighten the SCREWS.
Push the RUBBER SLEEVES (2R) over the remaining METAL PINS (1R). Insert the METAL PINS into the hole locations of
å
your choice in the UPRIGHTS (D). Set the ADJUSTABLE SHELF (R) onto the METAL PINS.
Using your hammer, gently tap a CAM COVER (19P) onto each HIDDEN CAM in the ENDS (A and B) and UPRIGHTS (D).
å
NOTE: Please read the back page of the instruction booklet for important safety information.
å
This completes assembly. Clean with a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story at Walmart.com or
R
20 lbs.
7 lbs.
D
35 lbs.
total
B
S
L e
f t D
30 lbs.
r a w
e r
Page 30
4 used)
A
D
2R
6 used)
T
R i g
h t
D r
30 lbs.
a w
e r
1R
19P
To cover HIDDEN CAMS
413852
n t
F r o
e r
a w
D r
D r
a w
e r
S i d
To reduce side to side travel,
loosen these SCREWS, push
the DRAWER FRONT BRACKET
outward as far as possible, then
tighten the SCREWS. Repeat
this for both sides of all drawers.
www.sauder.com/service
e
Publicidad
