Cleaning And Maintenance - cecotec READY WARM 3500 CURVED FLAMES Manual De Instrucciones

ENGLISH
Operation from the remote control
ON/OFF: Press this button to switch the device on/off..
Day: This button allows you to select the current day and time.
Hour: Press this button to select the timer by hours.
Min: Press this button to select the timer by minutes.
Week: Press this button to activate the weekly timer.
Set up button: Press this button to adjust the timer. Select the day with
the week button.
Flame: Press this button to increase or decrease the brightness of the
flame.
Heater button: Press this button to select the operating temperature.
The temperature can be adjusted in 15-30 ºC intervals using the "+" and "-"
buttons.
1. Low heat function
2. High heat function

6.CLEANING AND MAINTENANCE

• Turn heater OFF and unplug from electrical outlet before any cleaning or maintenance is
performed. Wait at least 10 minutes to allow all components to cool down properly.
• Use a vacuum cleaner or duster to keep heater and vent area clean from dust and dirt.
• The exterior of the fireplace should be cleaned with a damp cloth or duster.
• Do not use abrasive cleaners or liquid sprays.
38 READY WARM 3500 CURVED FLAMES
3V CR2025