Assigning The Menu; Updating Software - Pantech Link II Guia Del Usuario

To move a file from the card to the computer
1. Connect the data cable with mobile and the computer.
Menu
2. Select
3. Select Select USB
4. Select Music
5. Follow the instructions on your computer screen.
note: Select Music Player
Connection, it will ask you to select either the
with your computer.

Assigning the menu

You can set the most commonly used menu in Options in standby mode.
GO TO
1. Select
2. Select Add.
3. Select the menu and sub menu and select Save.

Updating software

You can update your software without visiting your nearest dealer.
To update the software
Menu
1. Select
Check for Update
2. Select
note: After downloading the software, the device will ask you whether to update the software now or later. If you
choose to update the software now, it will restart the handset. If you postpone updating the software, you can
select between 30 minutes, 1 hour or 4 hours in the Options. After selecting the updating time, you will be sent
back to standby mode. If you go to
22
Settings > Connectivity.
>
Mode.
Player, Mass Storage,
when you want to add music to the playlist in your device. When you select
> Unassigned.
Settings AT&T Software
> >
Yes
> to check whether or not you need to update the software.
Software Update
Modem Ask on Connection.
or
Music Player Mass Storage
or
Update.
while you are in postponing, select
Ask on
every time you connect your device
Continue Update.