Using The Remote Control; Connecting External Devices - Kicker ZK350 Manual Del Propietário

USING THE REMOTE CONTROL

The Infrared Remote Control enables you to control your Zune and access the ZK350 System Menu from a convenient
location. With the fully featured remote control it is easy to access all of your Zune's music and/or video content.
If a Zune HD device is in use and set to internal display, the up, down, back and enter buttons will not function. If the
Zune HD device is set to TV Out, these functions will be restored. All other legacy Zune devices offer complete remote
functionality.
Figure 5
Power On/Off
Mute On/Off
Change Treble, Bass and
Input Source options for
the ZK350
Skip Backward
(Hold down to Rewind)
Navigate to previous Zune
device menu directory
Navigate upward through the Zune menu directory or
increase values within the ZK350 System Menu.
Press the up arrow while in the Input Source Menu to
enable the Aux input.
Make selections and enter sub-directories within the Zune.

CONNECTING EXTERNAL DEVICES

To connect an external video display to the ZK350, make sure the video output is enabled on your Zune device. Connect
a standard RCA composite video cable from the composite video output on the back of the ZK350 to the RCA video
input on your external video display. See Figure 3. This is a pass-through connection. If there are any problems with your
external video display, refer to the Zune device manual or the instructions packaged with your external video display.
To connect an external audio device to the ZK350, enable Aux-In mode with the rotary or remote control as described in
the Input Source section on the previous page. Connect your line level device to the 1/8" stereo input on the back of the
ZK350. See Figure 3. If the sound is distorted, you may be overdriving the auxiliary input. Try turning down the external
device until the sound is no longer distorted.
To use an external audio device for output, connect the RCA outputs on the back of the ZK350 to the input(s) of your
third-party device. The audio output is at a fi xed level and not adjustable with the ZK350 volume control. Use your
external audio device to attenuate the input/output level.
To improve radio reception with your Zune device, connect the included FM antenna to the coaxial jack on the rear of the
ZK350.
ZK350
mode
enter
Navigate downward through the Zune menu directory or
reduce values within the ZK350 System Menu.
Press the down arrow while in the Input Source Menu to
disable the Aux input.
Navigate toward Zune root directory.
Volume Up
Volume Down
Play/Pause
Skip Forward
(Hold down to Fast Forward)
Navigate to next Zune
Device menu directory
5