Festo SPC200 Instrucciones Para El Usuario página 13

1 User
The axis interface type SPC−AIF−MTS−2 is used to connect
pneumatic axes to the SPC200 Smart Positioning Con
troller. It establishes the link with the MPYE−... propor
tional directional control valve and one of the following
measuring systems.
Axis interface type
SPC−AIF−MTS−2
For the use of the axis interface type SPC−AIF−INC the
following versions are recommended:
SPC200 with operation system as from version V4.90,
WinPISA as from version 4.5.
Detailed information on the axis interface can be found in
the P.BE−SPC200−... User Manual.
Caution
Pay strict attention to the following instructions shown
therein:
safety guidelines
specifications for the use of each module and compo
nent.
Warning
Prior to any installation or maintenance work, switch off
the power sources in the following sequence:
1. Compressed air supply
2. Load supply and operating voltage supply for the
SPC200.
Festo SPC−AIF−MTS−2 0611NH English
instructionsEnglish
Permitted measuring system type
Linear Drive type DGCI−... with digital measur
ing system
13