Xinlehong Toys High Speed 9109 Manual De Instrucciones página 11

3. Installing the remote control car battery (configuration A )
(1). Card battery in the car base covered remove the card lock , open the battery cover ;(Fig.1)
(2). Such as the correct polarity (Fig.2) into the six 1.5V " AA " batteries ( batteries not included) ;
(3). Close the battery cover , the card lock card in the car cradle battery cover (Fig.3).
(Fig.1)
4. Charge and install the rechargeable battery pack (configuration B )
(1). Charging the battery pack plug to connect to the
charging port of the charger first , then the charger plug
to the charging socket , then charge on the charger red
indicator light indicates charging began, about 3-4 hours
charging is completed.(Fig.1)
2
(Fig.1)
(2). Will card in the car cradle battery cover remove the
card lock to open the battery cover (Fig.2) ;
1
1
1
(Fig.2)
(Fig.2)
(3). (Fig.3) according to the correct polarity of the battery
pack socket connection to the interface of the remote
control cars inside the battery compartment , then 9.6V
rechargeable battery pack into the battery compartment ;
(Fig.3)
(4). Will card in the car cradle battery cover remove
the card lock to open the battery cover(Fig.4);
11
2
(Fig.3)
2
(Fig.4)